glass straight-line edging machine
Model No.: | ZM9 |
Product Description
Basic Specification
Processing speed | 1.26-6.0m/min |
---|---|
Spindles qty. | 9 |
Min.processing size: | 80x80mm |
Processing thickness | 3-25mm |
Size | 7000x1400x2500mm |
Voltage | 380v,415, |
Weight | 2650KG |
Level Of Automation | Full |
Production Capacity | 20days/set |
Power(w) | 19.08kw |
Type | Glass Edging Machine |
Detail Description
ZM9 glass straight-line edging machine (9 spindles)
ZM9 glass straight-line edging machine (9 spindles)
Glass samples:
Flat edger:
Ⅰ.Technical Specifications (ZM9):
1. Processing glass thickness: 3~25mm
2. Angle of arris:45°
3. Min. size of glass:80mm×80mm
4. Processing speed:1.0~4.5 m/min
5. Installed power: 19.08KW
6. Occupation: 6.9m×1.1m
7. The dimension of the machine: 7m×1.4m×2.5m
8. Power depends on your requirement.
9. Weight: 3000KGS
10.Stainless steel water tank
11.The infeed and outfeed adopts Timing belt to convey.
12. Most of Electrical components adopt Schneider (Made in Germany)
13. Wheels disposal:
NO.1 | diamond wheel | Ф150*Ф12*6*8 100grit | rough grinding |
NO.2 | diamond wheel | Ф150*Ф12*6*8 180grit | rough grinding |
NO.3 | resin wheel | Ф150*Ф12*10*10 240grit | semi-fine grinding |
NO.4 | 10S40 | Ф150*Ф70*30 | fine grinding |
NO.5 | resin wheel | Ф130*Ф12*10*10 240grit | semi-fine grinding |
NO.6 | 10S40 | Ф130*Ф70*35 | fine grinding |
NO.7 | resin wheel | Ф130*Ф12*10*10 240grit | semi-fine grinding |
NO.8 | 10S40 | Ф130*Ф70*35 | fine grinding |
NO.9 | wool felt wheel/CE-3 | Ф150*Ф105 | polishing |
Ⅱ.General Information:
1. ZM9 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness.
2. A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually.
3. Independent felt wheel and the cerium water recirculation system make the flat edge more shining.
4. Input and output conveyor adopt timing belt which can improve the transmission precision.
5. It is easy to operate and has good performance.
Ⅲ.The close-up picture
The front and rear Chain pads for transmission:
2. Speed control by stepless speed variator
3. When the machine adopts PLC Control, The lights will show the location of processing glass
4. The grinding motor for edging machine is Jinglong MOTOR. Made in China.
Ready for delivery, and package with film.
Ⅳ.Others
1. Delivery time:30 days(if the power condition is not 380v,50hz, it will take around 40 days)
- There is CE certificate for this product and it is under 1 year guarantee.
- Installation term: The seller will be responsible for the installation of the machines if the buyer required. The installation charge is 150usd/person/day. And the buyer should be responsible for round-trip air ticket, local transportation, lodging and meal for our engineers.
- Payment term: T/T or L/C
30% of the full amount as down payment, the balance before shipment.
Additional Information
Payment Terms | L/C, T/T |
---|---|
Minimum Order | 1 set |
Lead Time / Delivery Time | 30 Day(s) |
Sample Available | YES |
Delivery Details | the delivery date is according to the voltage of machine. |
FOB Port | Foshan,Guangzhou, |
Packing Info | Two sets of this machine are able to be loaded in one 20gp container. |
Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |